Super Thin Grinding Mill

SCM super thin grinding mill also called stone ultrafine mill is on the basis of more than 15 years’ production experience of our company, we absorb grinding mill technology advantages from the same field abroad and domestic, organizing elite powder processing experts to investigate, research, try again and again.
And finally we developed this high-efficiency and low-cost super thin mill by investigation and trial.

SCM series super thin grinding mill is mainly applied to the powder processing of mineral products in industries of metallurgy, construction, chemistry, fertilizer and mining etc. The grinding mill can produce powder from non-flammable and non-explosive mineral materials with mohs hardness below 9 and humidity below 8%, such as calcite, chalk, limestone, dolomite, kaolin, bentonite, talcum, talc, magnesite, illite, pyrophyllite, vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alum earth, graphite, fluorite, variscite, potash ore, floatstone and so on.

Big materials are crushed into smaller particles by hammer crusher. Then they are sent to store house by elevator. The electro-magnetic vibrating feeder sends the materials evenly to the middle of the upper dial. Under the function of the eccentricity, the materials scatter to the side of the circle and fall into the ring to be pressed, crushed and milled into pieces by rollers. After the first crush, materials fall into the second and the third layer. The pumping of the high-pressure centrifugal blower put the outside air into the machine. The coarse powder will be brought into the classifier.

The rotating turbine in the collector makes the coarse particles fall back for regrinding. The fine particles will come into the cyclone collector with the airflow and discharged by the discharging valve on the bottom of the collector. They are the final products. The airflow with little dust will be discharged through blower and muffler after being purified by the cyclone collector.

1. High efficiency. Under the same condition of finished particle size and power of motor, the output of thin grinding mill is 40% higher than airflow grinding mill and whisk grinding mill.
2. High using rate of the quick-wear part in same condition of material and finished particle size, the lifetime of the quick-wear part is longer than that of impact crusher and turbine crusher.
3. High safety. No axle tree or bolt is used in the grinding chamber, so there will be no worn out problem of bearing and sealing parts, and also no loose of bolts in the running of thin grinding mill.
4. Environmental protection. It will lighten pollution and noise by using dust cleaner and muffler, which achieves environmental protection requirement.

Model	SCM6015	SCM8021	SCM10027
Number of Roller (piece)	15	21	27
Ring Diameter (mm)	Φ600	Φ800	Φ1000
Number of Ring (piece)	1×3	1×3	1×3
Mai n Equipment Rotate Speed (r/min）	235	235	173
Max. Inlet Size (mm)	≤10	≤10	≤20
Final Size (mesh)	325~2500	325~2500	325~2500
Capacity (kg/h)	325~2500	600~4000	900~6800
Overall Size (m)	10×2.3×5.5	13×3×5.8	18×4×8.6

Name	Item	Unit	Specification and Technical Data
			SCM6015	SCM8021	SCM10027
Motor of Main Machine	Model		Y225s-4	Y250M-4	Y315S-4
	Power	KW	37	55	110
Classifier Frequency Modulation Motor	Model		Y160M-4	Y180M-4	Y200L1-4
	Power	KW	11	18.5	30
Motor of Elevator	Model		Y100L-4	Y100L-4	Y100L-4
	Power	KW	3	3	3
Motor of Blower	Model		Y200L1-2	Y225M-2	Y280M-2
	Power	KW	30	45	90
Hammer Crusher	Model		PC250X400	PC300X400	PC400X600
	Power	KW	15	15	18.5
Vibrating Feeder	Model		GZ1F	GZ1F	LS180X1050
	Power	KW	0.06	0.06	0.2
Discharge　Value	Model		ZJD1:40	ZJD1:40	ZJD1:40
	Power	KW	0.75	0.75	0.75
Pulsed Duster	Model		DMC72-Ⅱ	DMC120-Ⅱ	DMC120-Ⅱ

Note: This specification is just reference, any changes are subject to the SCM series super thin mill products

• E-mail : mill@sbm.net
• Address : No.416 Jianye Road,South Jinqiao Area,Pudong New Area, Shanghai, China
• Tel : 0086-21-58383058 0086-21-58383022
• Fax : 0086-21-58383058
•