CS Cone Crusher

CS Cone Crusher is a kind of high efficiency spring cone crusher, which integrate optimization of cavity-type and reasonable stoke and advanced technology, and follows the conception of laminated crushing principle of more crushing and less grinding.

CS Cone Crusher made plaster stone and engine oil separated, assured reliable performance. The type of crushing chamber depends upon the size of feed and fineness of the crushed product. The standard type is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head is applied to fine crushing.

Comparing with other kinds crusher, CS Series spring cone crusher (CS Cone Crusher) with high-efficiency and optimization of cavity-type has excellences for fine crushing, high reductions and low maintenance. The long force arm designed into the Symons cone provides greater crushing force.

The CS Cone Crusher has the advantage of reliable construction, high prod activity, easy adjustment and less cost in operation. The spring release system of crusher acts an overload protection system that allows tramp to pass through the crushing chamber without damage to the crusher, use dry soil, water, two kinds of sealed formation.

Symons type cone crusher is the earliest cone crusher sand also the most widely used cone crusher in the world today. CS Cone Crusher is widely applied in cement making industry, building, sand making, metallurgical industry, etc. The cone crusher from China is suitable for both metallic minerals and non-metallic minerals, such as iron ore, nonferrous metal ore, granite, limestone, quartzite, sandstone, pebble, etc.

Cone crusher crushes materials by the working surface between the movable cone and fixed cone. The movable cone is supported by spherical bearing and fixed on a hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are driven by the eccentric shaft sleeve together.

The eccentric shaft sleeve is driven by horizontal shaft and fabricated gear, and the wheel of the conveyor belt is driven by motor through v-belts. The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve of cone crusher rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the cone leaves, grinded materials is discharged from the discharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole; consequently the output size is determined.

The CS Cone Crusher has the advantage of reliable construction, high prod activity, easy adjustment and less cost in operation. The spring release system of crusher acts an overload protection system that allows tramp to pass through the crushing chamber without damage to the crusher, use dry soil, water, two kinds of sealed formation.

Mantle Diameter of the CS Cone Crusher come in different sizes depending on desired production output rates. This size also determines the maximum diameter of input material the cone crusher can handle. Fine vs. Standard Head Size This has to do with the clearance built into the mantle in terms of its distance from the liners. Fine heads have less clearance and can produce a finer output product while standard heads allow for a larger output product. Remote Adjustment in Cone Crushers Remote adjusters in cone crushers are a quite valuable feature, often adding $100,000 to $150,000 to the price of a unit. They allow for "on-the-fly" adjustment of the mantle/liner clearance distance. If you don't have this feature you must stop the crusher and adjust it with wrenches. Some manufacturers included this as a standard feature.

Type	Dia. of cone mm (inch)	Cavity	Feed Opening (mm)		Discharge Setting (mm)	Capacity (t/h)	Counter Shaft (r/min)	Power (kw)	Weight (t)	Overall Dimension (mm)
			Closed Side"B"	Opening Side"B"
CSB75	900(3')	Fine	83	102	9-22	45-91	580	75	15	2821×1880×2164
		Coarse	109	175	13-38	59-163
CSB110	1200(4')	Fine	127	131	9-31	63-188	485	110	20	2821×1974×2651
		Medium	155	156	13-38	100-200
		Coarse	178	191	19-51	141-308
CSB160	1295(4 1/4')	Fine	109	137	9-31	109-181	485	160	27	2800×2342×2668
		Medium	188	210	13-38	132-253
		Coarse	215	241	19-51	172-349
CSB240	1650(5 1/2')	Fine	188	209	16-38	181-327	485	240	55	3911×2870×3771
		Medium	213	241	22-51	258-417
		Coarse	241	268	25-64	299-635
CSB315	2134(7')	Fine	253	278	19-38	381-726	435	315	110	4613×3251×4732
		Medium	303	334	25-51	608-998
		Coarse	334	369	31-64	789-1270
Short Head Symons Cone Cruser Technical Data
Type	Dia. of cone mm (inch)	Cavity	Feed Opening (mm)		Discharge Setting (mm)	Capacity (t/h)	Counter Shaft (r/min)	Power (kw)	Weight (t)	Overall Dimension (mm)
			Closed Side"B"	Opening Side"B"
CSD75	914(3')	Fine	13	41	3-13	27-90	580	75	15	2821×1880×2410
		Coarse	33	60	3-16	27-100
CSD110	1218(4')	Fine	29	57	5-16	50-132	485	110	20	2560×1942×2928
		Medium	44	73	10-16	90-145
		Coarse	56	89	13-19	141-181
CSD160	1295(4 1/4')	Fine	29	64	3-16	36-163	485	160	27	2800×2342×2668
		Medium	54	89	6-16	82-163
		Coarse	70	105	10-25	109-227
CSD240	1676 (5 1/2')	Fine	35	70	5-13	90-209	485	240	55	3917×2870×3771
		Medium	54	89	6-19	136-281
		Coarse	98	133	10-25	190-336
CSD315	2134(7')	Fine	51	105	5-16	190-408	435	315	110	4130×3251×4454
		Medium	95	133	10-19	354-508
		Coarse	127	178	13-25	454-599

Note: This specification is just reference, any changes are subject to the CS Cone Crusher products.

• E-mail : mill@sbm.net
• Address : No.416 Jianye Road,South Jinqiao Area,Pudong New Area, Shanghai, China
• Tel : 0086-21-58383058 0086-21-58383022
• Fax : 0086-21-58383058
•