Impact Crusher

Impact Crusher is a new product that absorbs advanced technologies at home and abroad. Impact crusher is suitable for materials whose compressive strength is under 360Mpa, and particle size is less than 500mm. The company impact crusher features easy maintenance, high crushing ratio and crushing efficiency etc.

Our impact crushers have proven to be rugged, high performance and cost effective solutions in a variety of applications. Our customers will testify to both outstanding service and investment value. Our impact crushers are successfully crushing a wide range of materials such as limestone, dolomite, gravel, basalt, copper reverts, concrete and asphalt. Whether you need a portable, stationary impact crushing plant, we have the optimum, innovative solution for your specific needs.

Impact crusher widely applied in mining, transportation, energy, construction and chemical industry. With end products in cubic shape, impact crushers are the ideal crusher for aggregates processing in high-type highway building, water conservancy and power construction.

We design and supply primary and secondary impact crushing plants. The impact crusher shown left in this modern aggregate processing installation is a highly popular plant for secondary crushing applications. It is a brute of a crusher that handles concrete full of rebar, asphalt and other debris to produce highly saleable materials.

Liner plate, first stage impact curtain with anvils, impact curtain adjusting rods, second stage impact curtain with anvils, third stage impact plate, discharge opening, back-up bar, wedge lock assembly, blow bar, rotor.

1. High reduction ratio and crushing efficiency.
2. No-board connection.
3. Impact plate with a special shape.
4. Crushed product with cubical shape.
5. Easy maintenance and reliable operation.

Impact crusher crushes materials with impact force. When the materials enter the blow bar area, they are crushed due to the high-speed impact of the blow bar and are thrown to the impact plates on the rotor for secondary crush.

Then the materials will be shot back to the blow bar again for the third crush. This process repeats until the materials are crushed to the required size and discharged from the lower part of the machine. The size and shape of the finished powder can be changed by adjusting the gap between the impact rack and rotor support.

The impact crusher employs self-weigh security device in its back frame. When other objects enter the impact cavity, they will be forced out of the machine by the impact rack in the front and back of the machine.

Model	Spec.(mm)	Feeder Opening(mm)	Max. Feeding Size (mm)	Crushing Capacity(t/h)	Motor Power(KW)	Weight(t)
PF-1010	Φ1000×1050	400×1080	350	50-80	55-75	12.6
PF-1210	Φ1250×1050	400×1080	350	70-120	110-132	14
PF-1214	Φ1250×1400	400×1430	350	80-160	132-160	18.6
PF-1315	Φ1300×1500	860×1520	350	160-260	180-260	24.2
PFV-1010	Φ1000×1050	400×1080	350	60-100	55-75	13.2
PFV-1210	Φ1250×1050	400×1080	350	70-150	110-132	15.2
PFV-1214	Φ1250×1400	400×1430	350	100-200	132-160	18.6
PFV-1315	Φ1320×1500	860×1520	350	150-300	180-220	24.5

Note: This specification is just reference, any changes are subject to the impact crusher products.

• E-mail : mill@sbm.net
• Address : No.416 Jianye Road,South Jinqiao Area,Pudong New Area, Shanghai, China
• Tel : 0086-21-58383058 0086-21-58383022
• Fax : 0086-21-58383058
•